|Place of Origin:||China(mainland)|
|Brand Name:||Global Chemicals|
|Model Number:||SOULBIO AT|
|Minimum Order Quantity:||1 ton|
|Packaging Details:||25kg plastic woven bag|
|Delivery Time:||10 days after getting the original L/C or T/T payment|
|Payment Terms:||L/C at sight or TT in advanced|
|Supply Ability:||2000 tons per year|
|Classification:||Chemical Auxiliary Agent||Model Name:||SOULBIO AT|
|Chemical Composition:||Special Derivative Of Fatty Acid Compound||Ionicity:||Anionic|
|Appearance:||Pale Yellow Flakes||PH Value:||6~8(5~10% Solution)|
High Performance Softening Chemicals AT For Cotton / Linen And Fabrics
SOULBIO AT is an anionic textile softener with excellent hydrophilic, soft handle as like cationic softener and low yellowing as like nonionic softener, which is applied to softening
finishing and hydrophilic finishing of all kinds of fibres, especially for cotton, linen and their
Product's basic information
|Product Name||SOULBIO AT (Anionic Softener)|
|Chemical Composition||Special derivative of fatty acid compound|
|Appearance||pale yellow flakes|
|PH value||6~8(5~10% solution)|
1. Impart very soft, smooth and full handle to fabric.
2. Good hydrophilic, antistatic and low yellowing properties, no influence on whiteness.
3. Compatible with anionic and nonionic auxiliaries except cationic auxiliary.
Temperature raising: Add the flakes in water (room temperature) gradually in the proportion of 5-10%, stir them and heat up to 90-95℃ and stir for 30-60mins again until the flakes
become an even paste, then cool it down.
High temperature: Add the flakes in water (90-59℃) gradually in the proportion of 5-10%,
stir them for 30-60mins again until the flakes become an even paste, then cool it down.
||Dosage: 20~30g/L(10% solution)
Process: one dip and one pad or two dips and two pads.
||Dosage: 3~8%(o.w.f)(10% solution)
Liquor ratio: 1:10~15
Temperature: 40~50℃ Time: 30mins
|Storage and Packing
|Shelf life||12 months when store in cool, dry and shaded warehouse.|
|Packing||25kg plastic woven bag|
Notice: Compatibility of other auxiliaries and process need to be checked before application.