Place of Origin:
SILISOFT GB-HQ133 (Hydrophilic Silicone for Nylon)
Amino polyether modified polysiloxane
Appearance:Pale yellow transparent low viscosity liquid
☆Hydrophilic silicone oil, self-emulsifying, with good fluffy and inner soft handle；
☆It is hydrophilic on all kinds fabrics, and the hydrophilicity does not decrease over time；
☆Low yellowing, no color change after finishing and with good stability.
Field of Application
☆Especially suitable for nylon and its blended fabric, hydrophilic, soft & fluffy handle；
☆Can also be used for super hydrophilic finishing on other fibers such as cotton and their
GB-HQ133 is self-emulsify silicone oil and become a nearly transparent emulsion after simple
emulsification and dilution. And charging 5~10% emulsifier to get more economical and stable dilution
is also recommended.
Process recommended 1: charge 200KG GB-HQ133, and add 800KG deionized water into the container
slowly, stir for 90min and make sure stir well to get a 20% concentration emulsion.
Process recommended 2: charge 20KG emulsifier(Such as BASF Lutensol TO-7) and 200KG GB-HQ133
into the container, stir for 15min, then charge the mixture of 1KG Acetic Acid and 99KG deionized water
slowly, and slowly add 680kg water by 1hour. Make sure stir well at every step and a 20%
concentration emulsion was gotten.
Application(Taking a 20% concentration emulsion as an example)
☆Padding:Dosage:20～60g/L Temperature& Time:150～180℃×30～90s
Process:one dip and one pad or two dips and two pads , Liquid rate 70～90%
☆Dipping:Dosage:0.5～4.0%(o.w.f) Temperature& Time:30～40℃×15～30min
(The above process is for reference only, and the specific process needs to be determined
according to factors such as fabric types and equipments.)
Storage and Packing
Shelf life:6 months when store in cool, dry and shaded warehouse.
Packing:120kg plastic drum
Send your inquiry directly to us