High Performance Anionic Softener Flakes

High Performance Anionic Softener Flakes For Cotton / Linen and Fabrics

SOULBIO AT (Anionic Softener)

Chemical Composition

Special derivative of fatty acid compound

Properties

Good hydrophilic, antistatic and low yellowing properties , no influence on whiteness

Impart very soft, Smooth and full handle to fabric

Compatible with anionic and nonionic auxiliaries except cationic auxiliary 

Technical Specification

Appearance: pale yellow flakes

PH value: 6~8(5～10% solution)

Ionicity: anionic

Dissolving Method

Temperature raising : Add the flakes in water(room temperature )gradually in the proportion of  5-10%, stir them and heat up to ( 65~75℃ ) and stir them for 30-60 mins again until the flakes become even paste, then cool it down.

High temperature :Add the flakes in water ( 65~75℃) gradually in the proportion of 5-10%,

stir them for 30-60 mins again until the flakes become even paste, then cool it down.

Field of Application

Applied to softening finishing and hydrophilic finishing of all kinds of fibres , especially for cotton , linen and their blended fabrics 

Application

Padding: Dosage: 20～30g/L (10% solution)          Temperature: 30～40℃

                Process: one dip and one pad or two dips and two pads

Dipping:  Dosage: 3～8%(o.w.f)(10% solution)      Liquor ratio: 1:10～15

               Temperature: 40～50℃                     Time: 30min

Storage and Packing

             Shelf life: 12 months when store in cool, dry and shaded warehouse

             Packing: 25kg plastic woven bag